Pressure Reducing Valve And Station

Product Details:

Self Actuating, Internally Sensed Pilot & Piston operated, Direct Spring & Diaphragm Actuated, Top & Bottom Guided Pressure Reducing Valve with screwed / Flanged End connection.

• PRV-100 Series type PRV consisting of two Valves - an internal Pilot & Main Valve
• Highly Sensitive Pilot
• This Valve Operates on Spring & Diaphragm Balance Principal
• Very High flow Rate due to full lift of main Valve and Body design
• Extremely compact & Light weight design
• The Internal Pilot design eliminates external Piping Sense

• Compact & Versatile design for accurate regulation with widest possible range of flow.
• High flow rate with greater accuracy due to full lift design.
• Stallited trims for high pressure & temperature.
• A positive tight shut off by accurate guiding of pilot & main valve assembly.
• Constant Outlet pressure is accurately maintain without unaffecting by changes in inlet pressure or flow rate.
• Stainless Steel Diaphragm & Harden internal parts provide high performance over long period & trouble free service life.
• Non metallic trims to give dead tight shut off on air & non corrosive gas application

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

Steam-Con PRV-100 Series of Internally Pilot & Piston Operated Pressure Reducing Valve Provide Extremely accurate levels of Pressure Regulation for Steam, air and Industrial gas application. This is accomplished with a highly sensitive pilot which continuously monitors both inlet & outlet Pressure simultaneously. The result is a constant pressure irrespective of erratic inlet pressure of system demand.

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temp.
• Line Size

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

• Complete Pressure Reducing Station / System (PRS) consisting of
• Steam Separator with drain assembly.
• " Y" type Strainer
• Pressure Reducing Valve- Self ActuatingMechanical Type
• Safety Valve -Angle Discharge, Spring Loaded, Full Lift, Conventional type.
• Isolation Valve (Gate valve / Piston valve) OS & Y type, H / W Operated, for Inlet, Outlet & By Pass valve (Globe valve / Piston valve)
• Pressure gauge with Syphon cock for Inlet & Outlet Pressure Reading

completely fabricated with Seamless pipes, fittings and flanges with bypass line dully assembled / testing & certified with IBR form III-A

• All Inlet & Outlet Isolation, bypass Valves [Gate / Globe / Piston], PRV, SRV, Strainers, Separator are in house manufacturing products.
• All Piping / SRV / PRV are correctly Sized with Sizing Selection Programme for Accurate Controlled Performance.
• Complete PRS is in house Fabricated with high skill IBR approved welder with seamless pipes, fittings and flanges with bypass line dully assembled and finally tested and certified with IBR form III-A.
• Hydro Testing of PRS and Final Pressure setting is done with air before dispatch.

• PRS for process heating applications in sugar, food, textile, paper, chemical, pharma etc.
• Deaerator, Ejector PRS for boiler
• Turbine bypass / Exahust / Bleed PRS

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

• Steam Flow Rate
• Steam Inlet Pressure , Kg/cm2
• Steam Outlet Pressure in Kg./cm2
• Steam Inlet temperature in Deg. C

Product Details:

Globe Type, Single Seated, Top & Bottom Guided, Single Spring & Diaphragm Actuated, Pneumatic / Motorized Operated Pressure Reducing Valve

• PCV-100 series Pneumatic / Motorized operated pressure reducing valve is high in demand where accurate down stream high pressure control with high flow is required.
• Top & Bottom guided design for high stability & accurate pressure control
• Cage guided design is offered for highpressure requirement.

• Top & Bottom guiding provides maximum support to the plug for it’s stability and eliminates the side thrust effect of pressure drop across the plug.
• This valves are designed to control fluid flow at high pressure
• Up stream & Down stream pressure control for Air / Gas / Steam / Liquid.
• This design provides tight shutoff capability for such processes.

Bri-Con Pneumatic / Motorized operated pressure reducing valve can be used for many Industrial application where reducing high pressure of steam, gases and other fluids to be kept constant with high pressure & high flow.

• Pressure Transmitter
• P.I.D. Controller
• Air Filter Regulator (AFR)
• Positioner
• Quick Exhaust
• Volume Booster
• Extended / Finned Bonnet
• Bellows Seal
• Hand Wheel

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temperature
• End Connection
• Fail Position

Product Details:

Globe Type, Single Seated, Top & Bottom Guided, Single Spring & Diaphragm Actuated, Roboter Operated Pressure Reducing Valve

• Roboter operated pressure reducing valve is high in demand where accurate down stream pressure control is required with high flow
• Top & Bottom guided design for high stability and accurate pressure control

• Top & Bottom guiding provides maximum support to the plug for it’s stability and eliminates the side thrust effect of pressure drop across the plug.
• This valves are designed to control fluid flow at high pressure
• This valves does not require external Instrumentation or Electrical signal
• Accurate down stream pressure control with high flow rate
• Turn down ratio for pressure is 20: 1

Bri-Con Roboter operated pressure reducing valve can be used for many Industrial application where reducing pressure of steam, gases and other fluids to be kept constant with high flow.

• Air Filter Regulator[ AFR ]
• Extended / Finned bonnet
• Bellows Seal
• Manual Override : Hand wheel

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temperature
• End Connection

Product Details:

Self Actuating, Internally Sensed Pilot & Piston operated, Direct Spring & Diaphragm Actuated, Top & Bottom Guided Pressure Reducing Valve with screwed / Flanged End connection.

• PRV-100 Series type PRV consisting of two Valves - an internal Pilot & Main Valve
• Highly Sensitive Pilot
• This Valve Operates on Spring & Diaphragm Balance Principal
• Very High flow Rate due to full lift of main Valve and Body design
• Extremely compact & Light weight design
• The Internal Pilot design eliminates external Piping Sense

• Compact & Versatile design for accurate regulation with widest possible range of flow.
• High flow rate with greater accuracy due to full lift design.
• Stallited trims for high pressure & temperature.
• A positive tight shut off by accurate guiding of pilot & main valve assembly.
• Constant Outlet pressure is accurately maintain without unaffecting by changes in inlet pressure or flow rate.
• Stainless Steel Diaphragm & Harden internal parts provide high performance over long period & trouble free service life.
• Non metallic trims to give dead tight shut off on air & non corrosive gas application

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

Steam-Con PRV-100 Series of Internally Pilot & Piston Operated Pressure Reducing Valve Provide Extremely accurate levels of Pressure Regulation for Steam, air and Industrial gas application. This is accomplished with a highly sensitive pilot which continuously monitors both inlet & outlet Pressure simultaneously. The result is a constant pressure irrespective of erratic inlet pressure of system demand.

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temp.
• Line Size

Product Details:

Self Actuating, Internally Sensed Pilot & Piston operated, Direct Spring & Diaphragm Actuated, Top & Bottom Guided Pressure Reducing Valve with screwed / Flanged End connection.

• PRV-100 Series type PRV consisting of two Valves - an internal Pilot & Main Valve
• Highly Sensitive Pilot
• This Valve Operates on Spring & Diaphragm Balance Principal
• Very High flow Rate due to full lift of main Valve and Body design
• Extremely compact & Light weight design
• The Internal Pilot design eliminates external Piping Sense

• Compact & Versatile design for accurate regulation with widest possible range of flow.
• High flow rate with greater accuracy due to full lift design.
• Stallited trims for high pressure & temperature.
• A positive tight shut off by accurate guiding of pilot & main valve assembly.
• Constant Outlet pressure is accurately maintain without unaffecting by changes in inlet pressure or flow rate.
• Stainless Steel Diaphragm & Harden internal parts provide high performance over long period & trouble free service life.
• Non metallic trims to give dead tight shut off on air & non corrosive gas application

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

Steam-Con PRV-100 Series of Internally Pilot & Piston Operated Pressure Reducing Valve Provide Extremely accurate levels of Pressure Regulation for Steam, air and Industrial gas application. This is accomplished with a highly sensitive pilot which continuously monitors both inlet & outlet Pressure simultaneously. The result is a constant pressure irrespective of erratic inlet pressure of system demand.

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temp.
• Line Size

Product Details:

Self Actuating, Internally Sensed Pilot & Piston operated, Direct Spring & Diaphragm Actuated, Top & Bottom Guided Pressure Reducing Valve with screwed / Flanged End connection.

• PRV-100 Series type PRV consisting of two Valves - an internal Pilot & Main Valve
• Highly Sensitive Pilot
• This Valve Operates on Spring & Diaphragm Balance Principal
• Very High flow Rate due to full lift of main Valve and Body design
• Extremely compact & Light weight design
• The Internal Pilot design eliminates external Piping Sense

• Compact & Versatile design for accurate regulation with widest possible range of flow.
• High flow rate with greater accuracy due to full lift design.
• Stallited trims for high pressure & temperature.
• A positive tight shut off by accurate guiding of pilot & main valve assembly.
• Constant Outlet pressure is accurately maintain without unaffecting by changes in inlet pressure or flow rate.
• Stainless Steel Diaphragm & Harden internal parts provide high performance over long period & trouble free service life.
• Non metallic trims to give dead tight shut off on air & non corrosive gas application

Note : *We Recommend to Provide External Balance Pipe when the Reduced Pressure is Below 55% of the Inlet Pressure

Steam-Con PRV-100 Series of Internally Pilot & Piston Operated Pressure Reducing Valve Provide Extremely accurate levels of Pressure Regulation for Steam, air and Industrial gas application. This is accomplished with a highly sensitive pilot which continuously monitors both inlet & outlet Pressure simultaneously. The result is a constant pressure irrespective of erratic inlet pressure of system demand.

• Fluid/State
• Flow Rate
• Inlet Pressure
• Outlet Pressure
• Operating Temp.
• Line Size

Product Details:

Product Details: