Control Valves

Product Details:

BRI-CON Series 77 Globe type Single Seated Top-guided Single Spring & diaphragm actuated, throttling / on-off type Pneumatic Control Valve.

• Top-guided Single Seated Control Valve Provides max. support to ensure plug Stability.
• Quick change trim is provided as standard construction for easy maintenance as it is gasketed in to the valve body.
• High Flow coefficient enable this model to handle large flow rates as well as a wide Selection of reduced size valve plug makes this model idel for handling small flows. Smooth internal contours make it excellent for controlling slurries and viscus fluid.
• Class IV leakage is standard , optionally soft seating is provided for class VI leakage.
• This model is available with direct air to close and reverse air to open actuators.

• Pressure Temperature Rating : ANSI B 16.34 :
• Flange Rating : ANSI B 16.5
• Face to Face : ANSI B16.10
• Testing : API 598
• Leakage Class : ANSI B 16.104
• Control Valve Sizing : ISA - S75.01
• Flow Capacity test : ISA - S75.02
• Leak test : ASME / FCI 70.2
• IBR

Product Details:

A Pilot (Solenoid) operated Booster pump control valve is designed for Installation on the discharge of Booster pump to control opening & closing on pump start up and shut down, eliminates pipe surges.

A three-way solenoid valve controls the valve operations equipped with hydraulic check feature to close valve on pressure reversal and shut off pump in event of pump failure. Valve and pump operations are interlocked by limit switch assembly.

Product Details:

The model B TA-711, one way Altitude valve controls the high water level in elevated Tanks or reservoirs. The altitude pilot senses the hydrostatic head of the reservoir to close on high water level. When the water level drops below the predetermined set point the valve opens to fill the reservoir. Supply pressure is greater than static head pressure. Tank discharge is by separate line.

This is a hydraulically operated and pilot controlled valve which operates on the differential in forces between a spring load and the water level in the reservoir. The desired high water level is set by adjusting the spring force. The pilot control measures the head through a sensing line directly connected to the reservoir.

Product Details:

Operated by two way - three way solenoid pilot valve, BTA-311 a Solenoid Control Valve is an on-off control valve that either open or closes upon receiving an electrical signals to the solenoid pilot control, provides two position [On-Off] Operation.

This Valve is consist of a " Actrol " main Valve and a two way solenoid valve. The main valve opens fully or closes drip tight depending upon the actuation position of the solenoid, energized to open/energized to close. The valve may be remotely operated by timers, relays, probes or any triggered device to the solenoid.